Vestil EHN-40-C handleiding
Handleiding
Je bekijkt pagina 3 van 5
WARNING!
THIS PUMP LONG RAM IS DESIGNED FOR LIFTING PURPOSES ONLY. NOT FOR
SUPPORTING LOADS.
DO NOT LOAD BEYOND ITS REATED CAPACITY.
IMPORTANT: Its is possible that air has got into the hydraulic system, causing poor lifting performance.
Purge any air form the system by fully opening release valve (turn handle counterclockwise as shown),
then while holding the boom down, operate pump handle rapidly several times.
TO RAISE LOAD
Close release valve by turning handle CLOCKWISE to a SNUG-TIGHT position.
(DO NOT OVERTIGHTEN)
TO LOWER LOAD
Open release valve by turning handle COUNTERCLOCKWISE very slowly. The speed of lowering the
load is controlled by how much you turn the handle.
NOTE:
Front legs must always be locked in down position before applying load and/or raising boom.
Boom must be in fully lowered position before raising legs. Legs must never be raised when crane is
carrying load. Legs must be locked in place when raised.
OPERATING INSTRUCTIONS
Bekijk gratis de handleiding van Vestil EHN-40-C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | EHN-40-C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 672 MB |
