Vestil EHLT-TL-30180-2-58 handleiding
Handleiding
Je bekijkt pagina 3 van 22
Operator’s Manual 10/23/2023 EHLT-TL MANUAL
Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 3 of 22
ALWAYS use care to center and distribute the load evenly on the lift platform.
DO NOT attempt to lift an overhanging or cantilever load.
DO watch the load for shifting when the lift table is in operation.
ALWAYS keep clear of the lift table while it is moving.
DO NOT place hands or feet under the platform. DO NOT put any body part in the scissor mechanism.
DO NOT use this lift table to raise personnel.
DO NOT store objects under the platform.
DO NOT use the lift table if any damage is observed, or unusual noises heard.
DO NOT operate a lift table with its perimeter toe guard removed, disabled, or inoperable. An optional
accordion skirt may be installed in above-ground installations.
DO ensure that all information, safety, and warning labels remain in place and are legible. See Labeling
Diagram on page 21.
ALWAYS remove any load from the lift table before servicing the lift table or its hydraulic power unit. DO
completely lower the platform, or use the attached maintenance prop bars to support the platform, before
servicing this product.
If oil is needed, DO use anti-wear hydraulic oil with a viscosity grade of 150 SUS at 100°F (ISO 32 cSt @ 40°C)
or Dexron non-synthetic transmission fluid. DO NOT use brake fluid or jack oils in the hydraulic system.
Contact the manufacturer for SDS (Safety Data Sheet) information.
Maintenance and repairs are to be done only by personnel qualified to perform the required work.
Consideration will not be given for warranty repair charges without prior written authorization by the
manufacturer.
DO NOT perform any modifications to the lift table without the manufacturer’s approval. Failure to receive
authorization for changes to the equipment automatically voids the warranty. See Limited Warranty on p.
22.
NOTICE
Proper use and maintenance are essential for this product to function properly.
Always use this product in accordance with the instructions in this manual.
Periodically lubricate pivot points with bearing grease.
Keep the product dry and clean at all times. Only use this product indoors.
Use only factory-approved replacement parts. Contact the Technical Service and Parts Department of Vestil
Manufacturing to order replacement or spare parts. See contact information on cover page.
Contact the manufacturer for SDS information.
MODEL NUMBER AND CAPACITY
The lift table model number, serial number and capacities are printed on the nameplate, found on the hinged
side of the platform. Refer to the product catalog of the factory for further information. Include the model and
serial numbers in all correspondence with your dealer or the factory.
The load capacity rating as printed on the nameplate of your lift table designates its net capacity. The addition
of ancillary equipment to the lift table will necessitate a lowering of the load capacity. The lift table’s load capacity
must never be exceeded, as permanent damage or personal injury may result.
Bekijk gratis de handleiding van Vestil EHLT-TL-30180-2-58, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | EHLT-TL-30180-2-58 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5647 MB |
