Vestil EH-65-40 handleiding
Handleiding
Je bekijkt pagina 18 van 19
TABLE OF CONTENTS 5/12/2022 EH MANUAL
TABLE OF CONTENTS Copyright 2022 Vestil Manufacturing Page 18 of 19
2) The oil should be changed if it darkens, becomes gritty, or has a milky appearance (indicating the
presence of water). Replace with anti-wear hydraulic oil with a viscosity grade of 150 SUS at 100°F,
(ISO 32 at 40°C). E.g. AW 32 or HO 150 hydraulic oil or a non-synthetic transmission fluid. Synthetic
transmission fluid can be used after flushing the system with the synthetic fluid prior to filling the
reservoir.
Labeling Diagram
The unit should be labeled as shown in the diagram. However, label content and location are
subject to change so your product might not be labeled exactly as shown. Compare this diagram to
your RECORD OF SATISFACTORY CONDITION
. Replace all labels that are damaged, missing, or not easily
readable (e.g. faded). Order replacement labels by contacting the TECHNICAL SERVICE AND PARTS
DEPARTMENT online at http://www.vestilmfg.com/parts_info.htm. Alternatively, you may request
replacement parts and/or service by calling (260) 665-7586 and asking the operator to connect you to
TECHNICAL SERVICE.
A: Label 367 on both guards (left & right side)
B: Data tag 003
Label 206: Applied to oil tank near fill plug
Label 584: Above control buttons
Label 483: On control box
A
B
Bekijk gratis de handleiding van Vestil EH-65-40, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | EH-65-40 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4662 MB |
