Vestil CYL-DLX-1 handleiding
Handleiding
Je bekijkt pagina 5 van 6
Table of Contents Rev. 7/9/2019 CYL-DLX-1 MANUAL
Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 5 of 6
Using the dolly
1. Put a cylinder on the cart. Position the
cylinder so that it seats firmly against both
retainers.
2. Wrap the chains around the cylinder
with no slack.
3. Feed the free ends of the chains
through the latch openings in the retainers.
4. Seat a link of each chain in the vertical
slot.
5. Carefully push the dolly to the
necessary location. Do not traverse sloped
ground unless you are able to easily
control the dolly.
Record of Satisfactory Condition (the “Record”)
Before using the dolly for the first time, record its appearance and
function. Thoroughly photograph the unit from multiple angles to clearly
show all welds, wheels, fasteners, and chains. Push the dolly a short
distance. Describe how it sounds as the wheels rotate. This record
establishes satisfactory condition. Compare the results of all inspections
to this record.
Inspections and Maintenance
Inspect the dolly at least once per month. Compare your observations to the Record to determine if the
dolly is in satisfactory condition. If the inspection reveals problems, do not use the dolly until it is restored to
satisfactory condition. If you are uncertain whether the dolly requires repair or replacement parts, contact
Technical Service for assistance.
• Examine the dolly for cracked welds, metal fatigue, rust, and corrosion that affects the structural integrity
of the dolly.
• Inspect the cylinder brackets. Each bracket should be solidly welded to the upright frame.
• Check the hardware that fastens the handle to the frame. The connection should not be loose. Tighten
the fasteners if necessary.
• Check the overall structure of the dolly. The frame should be rigid and square.
Labeling diagram
The unit should be labeled as shown in the diagram. However, label content and location are subject
to change so your product might not be labeled exactly as shown. Thoroughly photograph the unit when
you first receive it as discussed in the Record of Satisfactory Condition section of this manual. Make sure
that your Record includes a photograph of each label. Modify this diagram, if necessary, to indicate
labeling actually applied. Replace all labels that are, damaged, missing, or not easily readable (e.g.
faded). Contact the Parts Department online at http://www.vestilmfg.com/parts_info.htm
to order
replacement labels. You may also call (260) 665-7586 and ask the operator to connect you to the Parts
Department.
Feed the ends of the
chains through the latch
openings and seat a
link in the vertical slot.
Retainer
A
B
C
A: Label 287
B: Label 286
C: Label 658
Bekijk gratis de handleiding van Vestil CYL-DLX-1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | CYL-DLX-1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1560 MB |
