Vestil CYL-D-1 handleiding
Handleiding
Je bekijkt pagina 5 van 7
Rev. 5/6/2013 CYL-D-1-HR, Manual.doc
Use Instructions:
1. Place the cylinder on the cart. Position the cylinder so that it seats firmly within the
(semicircular) cylinder brackets.
2. Wrap the chains around the cylinder with no slack.
3. Feed the free ends of the chains through the latch openings in the brackets, and seat a link
into the vertical slots.
Feed the ends of the chains
through the latch openings and
seat a link in the vertical slot.
Cylinder
bracket
Inspections and Maintenance:
Inspect the dolly periodically (at least every couple of months) to confirm normal condition. If the
inspection reveals problems, do not use the dolly until it is restored to normal condition.
Examine the dolly for cracked welds, metal fatigue, rust, and corrosion that affects the
structural integrity of the dolly.
Inspect the cylinder brackets. Each bracket should be solidly welded to the upright frame.
Check the hardware that fastens the handle to the frame. The connection should not be loose.
Tighten the fasteners if necessary.
Check the overall structure of the dolly. The frame should be rigid and square.
Copyright 2013 Vestil Manufacturing Corp. Page 5 of 7
Bekijk gratis de handleiding van Vestil CYL-D-1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | CYL-D-1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1591 MB |
