Vestil CRF-60 handleiding
Handleiding
Je bekijkt pagina 6 van 8
Table of Contents Rev. 4/29/2025 CRF, MANUAL
Table of Contents Copyright 2025 Vestil Manufacturing Co. Page 6 of 8
7. Examine the whole structure for rusting/metal erosion. Remove rust/corrosion with a mild abrasive or steel
wool. Clean the area and apply touchup paint if the affected area was previously painted. For stainless
steel surfaces, after removing rust, apply a thin layer of oil to the affected area.
Annual evaluation — At least once per year, qualified inspection personnel should use the carpet pole to lift a
full capacity load. Afterwards, conduct a Before Each Use Inspection to confirm that the product is in
satisfactory condition.
MAINTENANCE
Implement a maintenance program to ensure that the product functions properly and is adequately
maintained. The OSHA “General Industry” standard for “Powered industrial trucks” (29 CFR 1910.178) provides
recommended maintenance procedures. The following steps should be utilized in conjunction with those
procedures. ONLY trained, authorized personnel or contractors should perform inspection, maintenance, or
repair work.
NOTE: It is the end-user’s responsibility to select and train employees to work with/on (assemble, use, inspect,
and maintain) the carpet pole.
Step 1: Tag the carpet pole, “Out of Service.”
Step 2: Remove any dirt or other matter from all surfaces.
Step 3: Conduct a “Before each use” inspection. DO NOT use the product if you discover damage that
compromises the structural integrity of the carpet pole. Such damage includes, but is not limited to, severe
rusting/corrosion that has eroded metal from weight-bearing members). Permanently remove it from service.
Step 4: Perform all necessary adjustments, replacements and/or repairs but DO NOT modify the carpet pole.
NOTE: There are significant differences between necessary adjustments/repairs and modifications. An
“adjustment” is a simple correction that restores the device to satisfactory condition, such as tightening loose
fasteners, or removing dirt or other debris from the surface. “Repair” refers to removing worn parts and installing
replacement parts. A “modification” is a change that alters the carpet pole from its original condition, like
bending the structural members or removing a part or several parts. NEVER modify the device without first
obtaining express, written approval from Vestil. Unapproved modifications automatically void the LIMITED
WARRANTY (see p. 8) and might make the device unsafe to use.
Step 5: Make a dated record of all repairs, adjustments and/or replacements performed.
Bekijk gratis de handleiding van Vestil CRF-60, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | CRF-60 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1607 MB |
