Vestil CPC-40 handleiding
Handleiding
Je bekijkt pagina 5 van 11
Table of Contents Rev. 3/12/2021 CPC MANUAL
Table of Contents Copyright 2021 Vestil Manufacturing Page 5 of 11
EXPLODED VIEW AND BILL OF MATERIALS
USING THE PLATE CLAMP
NOTE: The clamp is BTH design category B, service class 1. It is not designed for use with stainless steel or
aluminum sheets. Materials must have a surface hardness of at least 30 RC (300 HB).
This lifter is a below-the-hook lifting device, design category B (used for loads and variations which are
severe and not accurately defined), service class 1 (20,001 to 100,000 load cycles). It should only be
operated by qualified personnel. ASME B30.20 defines qualified person as “a person who, by the
possession of a recognized degree in an applicable field or certificate of professional standing, or who, by
extensive knowledge, training, and experience, has successfully demonstrated the ability to solve or resolve
problems relating to the subject matter at hand.” Qualified persons include designated persons, trainees
under the direct supervision of a designated person, maintenance personnel, test personnel, and inspectors.
PART NO.
DESCRIPTION
QTY.
1
Cover Assembly 1
2
Latch Lever 1
3
Pad 1
4
Heavy Bolt
1
5
Lock Nut
1
6
Axis Pin
1
7
Spring Pin
1
8
Cam/Gripper
1
9
Connecting Link
2
10
Gripper Pin
1
11
Spring Pin 1
12
Spring Pin 1
13
Move Pin 1
14
Spring 2
15
Link Arm
1
16
Wheel Assembly
1
17
Split Pin
1
18
Intermediate link arm
2
19
Connecting Link Pin
1
20
Pin
1
21
Split Pin 1
22
Lock Nut 1
23
Chain 4
24
Shackle Link 1
25
Pear Link
1
26
Latch washer
1
Bekijk gratis de handleiding van Vestil CPC-40, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | CPC-40 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4596 MB |
