Vestil CL-17 handleiding
Handleiding
Je bekijkt pagina 7 van 11
Table of Contents Rev. 6/12/25 CL-16 & CL-17, MANUAL
Table of Contents Copyright 2025 Vestil Manufacturing Page 7 of 11
5. Deploy the Cargo Bar: Use the (ratchet)
operator lever to extend the cargo bar until
the rubber pads solidly engage both trailer
walls. Be careful not to overextend the bar
and cause damage to the trailer.
6. Verify Stability: Ensure the cargo bar solidly
engages the trailer walls. The rubber feet
should not move/slide if slight pressure is
applied to the cargo bar.
7. Apply additional cargo bars as needed to
adequately restrain your cargo: Bars can be
deployed horizontally (as shown in the photo)
as well as vertically. Applying a cargo bar at
floor level is an effective method for
restraining pallets/skids.
8. Removal: Release the cargo bar by putting the direction selector switch in the RETRACT
position. Apply slight pressure to one of the rubber pads while operating the lever, i.e. press
the pad away from the trailer wall. Without applying pressure, the ratcheting mechanism
will not retract the bar.
9. Return the cargo Bar to its Storage Location: If you are using a CL-17 bar, fold the bar for
easy storage when not in use. Fold the bar by reversing the process described in Step 2.
INSPECTING AND MAINTAINING THE CARGO BAR
Inspections and repairs should only be performed by qualified persons. Compare the results
of each inspection to the RECORD OF SATISFACTORY CONDITION. Do not continue to use the
cargo bar unless all parts are in satisfactory condition. Replace parts that are not in
satisfactory condition before returning the unit to regular service. Never make temporary
repairs of damaged or missing parts. Only use manufacturer-approved replacement parts to
restore the unit to satisfactory condition. If you have any questions about the condition of your
cargo bar, contact the TECHNICAL SERVICE department at (260) 665-7586.
Regular Inspection: Visually inspect the cargo bar for wear, damage, or corrosion before
each use. Compare the current condition to the RECORD OF SATISFACTORY CONDITION to
identify any changes or damage.
o NOTE: as required by 49 CFR § 393.104(b) states: “All tiedowns, cargo securement
systems, parts and components used to secure cargo must be in proper working order
when used to perform that function with no damaged or weakened components,
such as, but not limited to, cracks or cuts that will adversely affect their performance
for cargo securement purposes, including reducing the working load limit.”
Rubber Pads: Inspect for significant wear, cuts, tears, or other damage that might affect
the pads ability to resist movement when solidly pressed against a trailer wall. Replace a
pad if necessary for it to be able to maintain grip.
Ratchet Mechanism: Ensure it functions properly in both directions (extend and retract; see
USING THE CARGO BAR on p. 6-7). Remove debris from the surfaces of the cargo bar that
might interfere with ratchet operation.
Cleaning: Remove dirt or debris from the surfaces of the cargo bar.
Labels and Markings: Check that all labels and markings are in place, easily readable from
a reasonable distance, and undamaged.
Replacement Parts and Labels: Use only manufacturer-approved replacement parts.
Contact Vestil at (260) 665-7586 or info@vestil.com for assistance.
Store Properly: Store the cargo bar in a dry, protected area when not in use to prevent
damage from weather or environmental factors.
Bekijk gratis de handleiding van Vestil CL-17, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | CL-17 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3095 MB |
