Vestil CART-550-AS handleiding
Handleiding
Je bekijkt pagina 8 van 12
7
6-2. Lifting the table
WA
RNING
1. DO NOT overload the lift table; ensure the load is within its rated capacity.
2.
All loads must be distributed evenly on at least 80% of the table area. DO NOT set loads to the side
or ends of the lift table surf
ace.
Press the lifting pedal several times until the table reaches the desired position.
The table does not elevate once it has reached the highest possible position even if the lifting pedal is continually
pressed.
The table lowers slightly after reaching the highest position.
NOTE:
The hydraulic cylinder is designed to hold the table. As is the nature of the hydraulic system, the table lowers
very slowly over an extended period of time, Please note the table will not stay at the same position
indefinitely.
6-3. Lowering table
WA
RNING
Keep your feet and hands clear of the scissors mechanism.
Pull the lowering lever up and table lowers.
7. Service instruction
7-1. Change hydraulic oil every 12 months.
7-2. Lubricate each point described below every mont
h:
Lubricating Points
(1) Fitting of cylinder……Oil
(2) Roller friction surface……Grease
(3) Link Pin ……Oil
(4) Pedal fitting point……Oil
(5) Link center pin……Oil
(6)
Joint……Gre
as
e
(7) Grease nipple……Grease
(8)
Hydraulic circuit
8. Hydraulic Circuit
Bekijk gratis de handleiding van Vestil CART-550-AS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | CART-550-AS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4220 MB |
