Vestil BOL-EAP-R-3-8X8 handleiding
Handleiding
Je bekijkt pagina 2 van 5
TABLE OF CONTENTS Rev. 5/16/2022 BOL-EAP MANUAL
TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Corp. Page 2 of 5
SIGNAL WORDS
SIGNAL WORDS appear in this manual to draw the reader’s attention to important safety-
related messages.
SAFETY INSTRUCTIONS
Vestil strives to identify foreseeable hazards associated with the use of its products, but no
manual can address every conceivable risk. Minimize the likelihood of injury by being mindful
of the hazards identified below and by inspecting and maintaining the product as instructed
in INSPECTIONS & MAINTENANCE
on p. 4.
WARNING
Risks of death or serious personal injuries.
• Read and understand this entire manual before installing, assembling, using, or servicing this
product. Keep this manual in a location known to persons who use the product. Read the
manual regularly to refresh your understanding of proper use, inspection, and maintenance
procedures.
• DO NOT attempt to resolve any problem(s) with the product unless you are both authorized
to do so and certain that it will be safe to use afterwards.
• DO NOT modify the product in any way UNLESS you first obtain written approval from Vestil.
Unauthorized modifications automatically void the LIMITED WARRANTY and might make the
product unsafe to use.
• Inspect the product at least once per month. DO NOT use this product if the inspection
reveals structural damage. Examples of structural damage include, but are not limited to, the
following: 1) Cracked, torn, or otherwise damaged shock absorber; 2) Corrosion, severe wear,
or other condition that compromises the integrity of the absorber; 3) Damaged or missing
fasteners anchor bolts or hardware that fastens the bollard to this absorber. Replace each
part that fails to pass an inspection. DO NOT use the product until it is fully restored to
satisfactory condition. See RECORD OF SATISFACTORY CONDITION on p. 4.
• DO NOT use the product if it is not securely anchored to the ground/surface. Relocate the
absorber and bollard if the absorber cannot be securely anchored to the ground/surface. This
might be the case if, for instance, the concrete where the product is installed is broken or the
anchor holes in the concrete have been enlarged.
• Replace the absorber immediately after it sustains damage. NOTE: Damaged sustained as a
result of the bollard’s intended/designed use is not covered by the LIMITED WARRANTY.
• DO NOT use this device UNLESS all labels (see LABELING DIAGRAM) are easily readable and
undamaged. Replace labels as soon as damage occurs or they become difficult to read.
NOTICE
Proper use, maintenance, and storage are essential for this product to function properly.
o Always use this product in accordance with the instructions in this manual and consistent
with any training relevant to machines, devices, etc. used in conjunction with this product.
DANGER
Identifies a hazardous situation which, if not avoided, WILL result in DEATH or
SERIOUS INJURY. Use of this signal word is limited to the most extreme situations.
WARNING
Identifies a hazardous situation which, if not avoided, COULD result in DEATH or
SERIOUS INJURY.
CAUTION
Indicates a hazardous situation which, if not avoided, COULD result in MINOR or
MODERATE injury.
NOTICE
Identifies practices likely to result in product/property damage, such as operation
that might damage the product.
!
!
!
!
Bekijk gratis de handleiding van Vestil BOL-EAP-R-3-8X8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | BOL-EAP-R-3-8X8 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1007 MB |
