Vestil BAR-R-84-S handleiding
Handleiding
Je bekijkt pagina 7 van 10
Rev. 9/26/2016 BAR-R & BAR-A, manual
Copyright 2016 Vestil Manufacturing Corp. Page 7 of 10
Assembly:
1. Position the frame pieces next to each other with gussets facing in opposite directions. Rack arms should be
parallel. For BAR-R-84-S racks, arms must be on the same side (point in the same direction). Refer to figures 1B
and 2B for appropriate spacing between the frame pieces.
2. Install the first bar stiffener. Attach one end of the stiffener to the front side of the upper stiffener bracket of
rack #1 using the hardware shown in Diagram 1 below. Connect the other end of the stiffener to the front side of
the lower stiffener bracket of rack #2. Do not tighten the nuts and bolts yet.
3. Attach the second stiffener to the frames. Attach it to the back side of the lower stiffener bracket of rack #1
and to the back side of the upper stiffener bracket of rack #2.
4. Tighten all connections.
Diagram 2:
Diagram 1:
12209
33011
33011
37030
Attach stiffeners to opposite sides of brackets
Attach stiffeners to opposite sides of brackets
Upper
stiffener
bracket
Lower
stiffener
bracket
Rack #1
Rack #2
Rack #1
Rack #2
Gusset
Bekijk gratis de handleiding van Vestil BAR-R-84-S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | BAR-R-84-S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2507 MB |
