Vestil BAR-R-84-D handleiding
Handleiding
Je bekijkt pagina 2 van 10
Rev. 9/26/2016 BAR-R & BAR-A, manual
Copyright 2016 Vestil Manufacturing Corp. Page 2 of 10
Signal words:
This manual uses “Signal words” to indicate the likelihood of personal injuries, as well as the probable
seriousness of those injuries, if the product is misused in the ways described. call attention to uses of the product
likely cause property damage. The signal words used appear below along with the meaning of each word:
Identifies a hazardous situation which, if not avoided, WILL result in DEATH or
SERIOUS INJURY. Use of this signal word is limited to the most extreme
situations.
Identifies a hazardous situation which, if not avoided, COULD result in DEATH or
SERIOUS INJURY.
Indicates a hazardous situation which, if not avoided, COULD result in MINOR or
MODERATE injury.
Identifies practices likely to result in product/property damage, such as operation that
might damage the product.
Safe use recommendations:
Vestil strives to identify all of the hazards associated with the use of its products. However, material handling is
dangerous and no manual can address every risk. Ultimately, the most effective means for avoiding injury is for the end-
user to exercising sound judgment during the assembly, installation, and use of this rack.
If this product is used improperly or carelessly, personal injury might result.
Failure to read and understand the entire manual before assembling, installing, loading or servicing the
product constitutes misuse. Read the manual to refresh your understanding of proper use and maintenance
procedures as necessary.
DO NOT exceed the maximum rated load.
Inspect the rack periodically (AT LEAST once per month). DO NOT continue to use the rack if the inspection
reveals structural damage. Examples of structural damage include: 1) warped, deformed, or damaged dividers or
base frame; 2) cracked welds; 3) enlargement of bolt holes; 4) corrosion, severe wear, or other condition that
affects the ability of the product to support weight; 6) damaged, deformed or cracked channels (for machined nuts).
Immediately tag out the rack, unload it completely, and replace each part that fails to pass an inspection. DO NOT
use the product until it is fully restored to normal condition. ONLY use manufacturer-approved replacement parts.
DO NOT use the product if any unusual noise or movement is observed. If a malfunction occurs, remove the unit
from service and notify your supervisor or maintenance personnel about the issue.
All loads stored on the rack must fit within the dimensions of the rack. DO NOT store any load that hangs over
the rack.
DO NOT use the rack UNLESS it is securely anchored to the ground.
ALWAYS evenly distribute and center loads applied to the rack.
ONLY install this rack on even, level surfaces.
DO NOT remove or obscure any label. All product labels must be readable and undamaged.
DO NOT climb on the rack.
DO NOT modify the rack in any way. Unauthorized modifications automatically void the limited warranty (see p.
6) and might make the rack unsafe to use.
Proper maintenance is essential for this product to function properly and to last as long as possible.
o Always use this product in accordance with the instructions in this manual and consistent with any training
relevant to the storage of materials on racks.
o Keep the rack clean & dry.
Bekijk gratis de handleiding van Vestil BAR-R-84-D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | BAR-R-84-D |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2507 MB |
