Vestil APTS-3660-CF handleiding
Handleiding
Je bekijkt pagina 6 van 8
Rev. 10/5/2017 APTS, MANUAL
Copyright 2017 Vestil Manufacturing Corp. Page 6 of 8
Installing the Casters (Models with –C or –CF Suffix)
If your toolbox includes casters, then the casters must be installed before the toolbox is put into service.
Step 1: Carefully turn the toolbox onto its back to expose the receivers,
which are numbered 1-4 in the diagram (below).
NOTE: How the casters are installed determines how the toolbox rolls
when it is pushed. Installing both rigid casters receivers 1 and 4 (or 2
and 3) causes the toolbox to roll lengthwise. If both rigid casters are
installed in receivers 1 and 2 (or 3 and 4), then the toolbox will roll
widthwise.
Rigid caster
Swivel caster
Step 2: A) Insert the mounting plate of each caster into a receiver. B) Then, insert
a carriage bolt through the holes in the receiver. Tighten a lock nut on the end of
each bolt.
Caster
receiver
Carriage bolt & nut
2
1
4
3
1 & 4
1 & 2
A.
B.
Bekijk gratis de handleiding van Vestil APTS-3660-CF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | APTS-3660-CF |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2432 MB |
