Vestil ALL-T-2-48 handleiding
Handleiding
Je bekijkt pagina 8 van 9

a
E
D
retaining pin
steering shaft
D. Locate the wheel shaft retaining pin,
which is identified with an arrow in photo D at
left. The retaining pin fixes the wheel shaft in
place, so that it cannot rotate or slide.
E. Before the wheel shaft can be removed,
the retaining pin must be removed. Tap the
retaining pin out of its channel as shown in
photo E.
F
G
F. Tap and pull the wheel shaft out of its channel through the drive shaft (see
photo A below).
G. Position the connection end (see Fig. 1, p. 1) of the tow bar around the
steering shaft and align all of the shaft openings; then insert the wheel shaft.
Step 2: Locate the shaft retaining pin; then remove it.
shaft retaining pin
Step 3: Remove the wheel shaft, position the tow bar around the steering shaft and then reinstall the wheel shaft.
Step 4: Remove the cross-link that connects the two sides of the tow bar with a flat blade screwdriver and a 1/4in.crescent
wrench
I
I. Remove the bolt
and nut that fix the
cross-link in place,
and then remove
the cross-link.
H
Bekijk gratis de handleiding van Vestil ALL-T-2-48, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Vestil |
Model | ALL-T-2-48 |
Categorie | Vorkheftruck |
Taal | Nederlands |
Grootte | 5123 MB |