Vestil AIR-THL-SS handleiding
Handleiding
Je bekijkt pagina 12 van 19
REV I | 8/6/19
12
6.3 Airbag Replacement
WARNING:NOpersons,otherthanqualiedpersonnel,shouldmaintainorservicethissystem.
WARNING: Before performing maintenance on this system, ensure that all energy sources are properly
isolated as described in the Safety–Energy Isolation section.
1. Ensure bucket (A) is empty and fully lowered.
2. Turnoandisolateenergysources,andperformin-houselock-out/tag-outprocedure.
3. Remove bucket pivot pin (D) from frame pivot tubes (B) and bucket pivot tube (C).
NOTE: Remove retaining bolts to allow removal of pivot pin.
4. Disconnect safety chain (H) from frame (D).
5. Disconnect airbag (H) from rear side of FLT frame (E) by removing nuts (G) from airbag bolts.
6. Disconnect air hose (K) from airbag.
7. Move bucket assembly (A) slightly forward from frame (E) to provide space for airbag removal.
8. Unbolt and remove airbag (H) from airbag bracket (I).
9. Replace the airbag as follows:
a. Locate new airbag (H) on airbag bracket (I), and replace and tighten bolts.
b. Move bucket assembly (A) into frame.
c. Re-connect air hose (K) to airbag.
d. Re-connect safety chain (F) to frame.
e. Insert bucket pivot pin (D) through frame and bucket pivot tubes (B), (C), then install
retaining bolt at each end of bucket pivot pin.
f. Replace and tighten nuts (G) on back of frame to re-connect airbag (H) to frame (E).
B
A
D
C
I
F
E
G
G
H
A) Bucket
B) Frame Pivot Tubes (2)
C) Bucket Pivot Tube
D) Bucket Pivot Pin
E) Frame
F) Safety Chain/Nuts
G) Airbag Nuts (2)
H) Airbag
I) Airbag Bracket
J) Bucket Airbag Pivot
K) Air Hose to Airbag
J
K
Bekijk gratis de handleiding van Vestil AIR-THL-SS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | AIR-THL-SS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3026 MB |
