Vestil AHSN-8-15-9-TLC handleiding
Handleiding
Je bekijkt pagina 22 van 26
Table of Contents Rev. 5/28/2025 AHSN, MANUAL
Table of Contents Copyright 2025 Vestil Manufacturing Co. Page 22 of 26
USING THE CRANE
Perform Before and After Each Use inspections (see p. 24) each time the crane is used.
WARNING
Risks of severe personal injury or death.
Only trained, qualified crane operators should use this device. The operating instructions in this
manual supplement safe crane and hoist operation practices learned during your training program.
ALWAYS apply safe material handling practices learned during your training program.
All personnel not participating in crane use must stay out of the crane operation area during use. Be
certain no person or object is under any part of the boom (I-beam) or the suspended load at any
time and particularly before lowering it. Instruct others to remain at a safe distance during operation.
Always carefully watch the boom and any load hanging from it while using the crane.
Always follow the hoist and trolley manufacturers’ instructions regarding proper use of their products.
BEFORE the load is connected to the hoist, lock or immobilize the casters (for instance with chocks).
DO NOT use the crane and notify your supervisor and maintenance personnel if: 1) you observe any
damage or hear unusual noise during operation; 2) if you observe any warping or deformation of the
beam, the uprights, the load hook or chain (or cable).
Height adjustment
Support the I-beam so that the height adjustment pins can be
removed, for instance with the tines of a fork truck or by
attachment to an overhead hoist. Raise the beam to the desired
height; then reinstall the adjustment pins. Each pin must extend
completely through a yoke. See Fig. 8.
Proper loading
Position the trolley and hoist directly above the load. Proper
centering requires the operator to center the trolley and hoist
above the center of the load as well as to position the long axis of
the I-beam above the center of the load. Proper positioning is
diagrammed below in Fig 9.
Fig. 8: Pin uprights at selected
height
Height
adjustment
pin
Hitch
pin
Upright
Leg
FIG. 9: Loading the crane
Properly centered hoist & trolley
Improperly centered hoist & trolley
Yoke
Yoke
!
Bekijk gratis de handleiding van Vestil AHSN-8-15-9-TLC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | AHSN-8-15-9-TLC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6579 MB |
