Vestil AHS-8-20-14-TLC handleiding
Handleiding
Je bekijkt pagina 19 van 26
TABLE OF CONTENTS Rev. 5/23/2025 AHS MANUAL
TABLE OF CONTENTS Copyright 2022 Vestil Manufacturing Corp. Page 19 of 26
Step 1B: [Models AHS-6-20-12, AHS-6-20-14, AHS-6-20-16, AHS-8-20-12, AHS-8-20-14 & AHS-8-2016] Fasten the
uprights to the leg assemblies; then fasten two beam clamps to the beam bracket.
Lay the leg assemblies on the ground. Then, slide the uprights into the leg channels of the leg assemblies.
Insert the telescoping tubes (uprights) until the 3
rd
pinhole in the uprights aligns with the pinhole in the leg
assemblies as indicated in Fig. 1B below. Each upright must be pinned to a leg assembly through the same
pinhole (diagram below shows pinning through 3
rd
pinhole). To pin an upright to a leg assembly, use a 1 in. x
6 in. retaining pin. See exploded view that corresponds to your crane model.
Step 2: Fasten I-beam to uprights. [NOTE: Shim only used in models AHS-6-20-12, AHS-6-20-14, AHS-6-20-
16, AHS-8-20-12, AHS-8-20-14 & AHS-8-2016.]
Insert the flange of the I-beam into the gap between the beam clamp and the top of the uprights
(circled in FIG. 2B below); then clamp the flange on the opposite side of the beam to the beam
bracket with the remaining beam clamps as shown in the diagram below.
FIG. 2A: End View of I-beam Connection to Beam Bracket of Upright
FIG. 2B: Clamp the I-beam to the tops of the uprights
Lower flange
of I-beam
I-beam
Upright
Beam clamp
Upright
Leg assembly
Height
adjustment pin
Hitch pin
½ in. zinc-plated
lock washer
Shim (inside edges
face each other)
½ in. -13 A325
structural nut
½ in. -13 x 2in.
A325 structural
bolt
Welded beam clamp
Outside edge
Inside edge
Leg channel
Shim (part no. 28-113-022)
Shim
FIG. 1b: Beam Clamp-to-Beam Bracket
Connection
FIG. 1B: Upright-to-Leg Assembly
Connections
Bekijk gratis de handleiding van Vestil AHS-8-20-14-TLC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | AHS-8-20-14-TLC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6431 MB |
