Vestil AHA-2-12-8-TLC handleiding
Handleiding
Je bekijkt pagina 23 van 24
TABLE OF CONTENTS Rev. 5/28/2025 AHA MANUAL
TABLE OF CONTENTS Copyright 2020 Vestil Manufacturing Co. Page 23 of 24
hoist (or hoist & trolley) the full usable length of the I-beam (dimension C in SPECIFICATIONS table). Return the test
load to the ground. Perform inspections A (Before and after each use) and B (Monthly). NOTE: Perform this part C
(Load test and a Before & after use inspection) whenever the crane is partially or fully disassembled and
reassembled, e.g. after installing replacement parts.
LABELING DIAGRAM
Each unit should be labeled as shown in the diagram. Label content and location are subject to change
so your product might not be labeled exactly as shown. Compare the diagram below to your RECORD OF
SATISFACTORY CONDITION. If there are any differences between actual labeling and this diagram, contact
TECHNICAL SERVICE.Replace all labels that are damaged, missing, or not easily readable (e.g. faded). To
order replacement labels or to inquire whether your unit is properly labeled, contact the technical service
and parts department online at https://www.vestil.com/page-parts-request.php or by calling (260) 665-7586
and asking for the Parts Department.
Label 649:
(Both Sides of I-Beam) Label 391
Label 599: Label 397: Label 398:
Label 256:
Label 532:
Label 601: Label 395: Label 392:
OR
OR
OR
OR
Label 400:
OR
Label 420:
OR
Bekijk gratis de handleiding van Vestil AHA-2-12-8-TLC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | AHA-2-12-8-TLC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6765 MB |
