Vestil AHA-2-12-10-VG handleiding
Handleiding
Je bekijkt pagina 20 van 24
TABLE OF CONTENTS Rev. 5/28/2025 AHA MANUAL
TABLE OF CONTENTS Copyright 2020 Vestil Manufacturing Co. Page 20 of 24
Step 8: Connect the casters to the legs.
a) Use a fork truck or hoist to lift a leg 8-10 inches above the ground.
b) Position a caster beneath the leg. Attach it using the hardware shown in either diagram 8A or 8B.
Tighten hardware to 15-20ft∙lb with a torque wrench.
c) Repeat steps a-b for the other 3 legs.
Your Vestil AHA-series crane is now ready to use.
3
3
3
/
8
in. zinc-
plated lock
washer
Diagram 8C: Caster installation;
6,000 lb. capacity models (AHA-6-#-
#)
Diagram 8A: Caster installation
2,000 lb. and 4,000 lb. capacity
models (AHA-2-#-# and AHA-4-#-#)
3
/
8
in. -16 x 1¼ in.
HHCS #2 zinc-
plated bolt
3
/
8
in. -16 x 1
1
/
2
in.
HHCS #2 zinc-
plated bolt
3
/
8
in. zinc-plated
lock washer
3
/
8
in. zinc-plated
flat washer
3
/
8
in. zinc-
plated hex nut
Each caster has a spring-biased locking pin. The end of the
pin seats into notches in the horn assembly of the caster.
Notches are located at 90-degree intervals around a
circle, which allows the caster to be locked in any 1 of 4
positions. NOTE: V-groove casters can be ordered without
the 4-position lock feature.
To change caster position:
1) Grab the pin ring and pull the pin out of a notch.
2) Turn the caster.
3) Release the pin.
4) Turn the caster until the pin seats into the closest notch.
Pin
ring
Pin
ring
Pin ring
Notch
Notch
Locking
pin
3
/
8
in. SAE zinc-
plated flat
washer
Diagram 8B: Caster installation; Dual
pneumatic, swivel casters
3
/
8
in. SAE zinc-
plated flat washer
3
/
8
in. zinc-
plated hex nut
Caster mount
bracket
1
/
2
”-13 x 1
1
/
4
”
HHCS #2 zinc-
plated bolt
1
/
2
” lock
washer, plain
finish, medium
finish
3
/
8
in. -16 x 1
1
/
4
in. grade A, zinc
finish bolt
3
/
8
” split lock
washer, carbon
steel, medium
zinc finish
1
/
2
”-13 zinc-
plated hex nut
1
/
2
” flat washer,
low carbon, zinc
finish
3
/
8
”USS
flat
washer,
USS, zinc
plated
3
/
8
”-16 hex
nut, zinc
plated, Gr. A
Pin
ring
Bekijk gratis de handleiding van Vestil AHA-2-12-10-VG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | AHA-2-12-10-VG |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6765 MB |
