Vestil AHA-2-10-8-ALO handleiding
Handleiding
Je bekijkt pagina 18 van 24
Table of Contents Rev. 12/9/2019 AHA MANUAL
Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 18 of 24
Step 2: [NOTE: If you ordered a “Come-along” kit, perform Step 8 on p. 21 first.] Fasten uprights to leg assemblies
(AHA-6-#-# series; 6,000 lb. capacity models) or yokes (2,000 lb. and 4,000 lb. models).
Insert the uprights into the receivers of the leg assemblies or yokes (yoke shown in diagrams). Align the 3
rd
pinhole
in each upright with the pinhole in the leg receivers as is depicted in Diagram 2 below.
Pin each adjustable upright to a leg assembly through the same (3
rd
) pinhole with adjustment pins. See Diagram 2A
below as well as the exploded views on p. 5-16. Turn the pin stops to be perpendicular to the adjustment pins to
secure the pins in place.
½ in. -13 x 2½ in.
A325
structural
bolt
Diagram 2: Connect
Uprights to Leg Assembly
A325 Nut
½in. zinc-
plated lock
washer
½in. x 3in. zinc-
plated clevis pin
Beam
mounting
bracket
Yoke
Leg weldment
Caster mount
bracket
Hitch pin
Step 3: Attach the uprights to the I-beam
1. Measure the flange width of the I-beam (see Diagram 3A).
2. Mark the centerline of the beam bracket and measure half
the width of the flange on either side of the centerline. (See
Diagram 3B).
3. Identify the 4 bolt holes in the bracket that lie just outside
the width of the beam flange.
Measure width of I-beam
flange (double arrow)
Centerline of
beam bracket
Centerline of beam plate
Diagram 3A
Adjustment pin
Adjustment
pin
Clevis pin
Threaded
knob
Hitch pin
Upright
Top view of mounting bracket
In this illustration, beam clamps
should be fastened to the
mounting bracket through the
second bolt hole (see arrows).
Diagram 3B
Beam
mounting
plate
= Centerline of
mounting plate
= Width of
beam flange
Pin adjustable
upright to leg
assembly with
adjustment pin
Centerline of beam bracket
½ of flange width
Flange
Pin stop shown
perpendicular
to pin
Receiver
Bekijk gratis de handleiding van Vestil AHA-2-10-8-ALO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | AHA-2-10-8-ALO |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6717 MB |
