Vestil AF-3060 handleiding
Handleiding
Je bekijkt pagina 4 van 5
Rev. 9/8/2020 AF, MANUAL
Copyright 2020 Vestil Manufacturing Corp. Page 4 of 5
RECORD OF SATISFACTORY CONDITION
Before putting this product into service, make a record of its appearance and operation. Photograph
the unit from multiple vantage points. Take close range photographs of all labeling applied to the unit.
Photograph all casters and caster brakes, all 4 legs of and both stiffeners that comprise the panel
supporting frame (items 2, 4, & 6), and all fasteners (pins, bolts, nuts, etc.). Describe the force
necessary to move the cart. Describe the motion of the cart as it rolls on its casters, i.e. smoothly and
evenly from side-to side without wobbling. Describe the sounds made by the cart as it rolls. Collate all
photographs and writings into a file. Mark the file appropriately to identify it. This file is a record of the
unit in satisfactory condition (the “RECORD”). Compare the results of all inspections to this RECORD to
determine whether the unit is in satisfactory condition. Do not use the cart unless it is in satisfactory
condition. Purely cosmetic changes, like damaged paint or powdercoat, are not changes from
satisfactory condition. However, touchup paint should be applied as soon as damage occurs.
INSPECTIONS AND MAINTENANCE
Regular inspections and maintenance are necessary to keep the device in satisfactory condition.
Compare the results of each inspection to your RECORD to determine whether the unit is satisfactory
condition or requires repairs or replacement parts. If you are uncertain whether a part requires repair or
replacement, contact TECHNICAL SERVICE for assistance.
• Periodically lubricate casters/wheels, especially if they become squeaky.
• Keep the product clean and dry. Store the cart indoors.
• Only use manufacturer- approved replacement parts.
Before each use: [Refer to EXPLODED VIEW on p. 3]
1. Check the surface of the product for dirt or other matter. Clean the surfaces.
2. Examine hardware & fasteners, including but not limited to bolts, nuts, and pins. Replace damaged,
worn, or corroded hardware.
3. Examine legs (item 2) and stiffeners (items 4 & 6), casters, and caster brakes for wear, breaks,
corrosion/rusting, damage, and metal fatigue.
4. Check all labels. See LABELING DIAGRAM below. Replace labels that are damaged or not easily
readable.
5. Examine the base frame for severe rusting/metal erosion, rot, thinned regions. If rusting is purely
superficial, remove the rust/corrosion with a steel bristle brush or steel wool. Clean the affected
area and apply touchup paint. If rusting, rot, or thinning has weakened the material, contact
TECHNICAL SERVICE for advice.
LABELING DIAGRAM
The unit should be labeled as shown in the diagram. Label content and locations are subject to
change so your product might not be labeled exactly as shown. Replace all labels that are damaged,
missing, or not easily readable (e.g. faded). To order replacement labels, contact the technical service
and parts department online at http://www.vestilmfg.com/parts_info.htm
. Alternatively, you may request
replacement parts and/or service by calling (260) 665-7586 and asking the operator to connect you to
the
PARTS DEPARTMENT.
Label 212
Label 287
Label 658
Bekijk gratis de handleiding van Vestil AF-3060, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | AF-3060 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1158 MB |
