Vestil A-LIFT-R handleiding
Handleiding
Je bekijkt pagina 9 van 12
Rev. 9/5/2017 A-LIFT, MANUAL
Copyright 2017 Vestil Manufacturing Corp. Page 9 of 12
Step 4
U
: Move the load to the desired location.
U
Step 5
U
: Return the lifter to its storage location. Engage the brakes, fold the winch handle, fully lower the forks, and
set the handle latch pin to lock the winch handle
Store the lifter in a dry location that is protected from weather.
UUsing the Deck PlatformU:
[NOTE: To use the deck, the forks must be attached to the carriage right-side up, as shown below & on p. 3.]
After you finish using the deck, remove it and store it in a dry location.
UTransporting the LifterU:
Before loading the A-lift into a transport vehicle, perform the following steps to minimize the chance of damaging the
lifter:
U
After you arrive at the unloading
destination:
Lock the castors or set the
brakes;
Unlock the winch handle and
turn it clockwise until the
load is positioned at a
comfortable height;
Lock the winch handle;
Remove the load.
Lower the forks until they are
a few inches above the legs.
b
a
Slide the connecting channel (see arrow) under the
lower carriage cross bar.
Set the connecting channel on top of the lower carriage
cross bar;
let the deck rest on t
op of the forks.
1. Remove the forks and store the
forks and fork retaining pins.
2. Lower the carriage completely.
3. Rotate the pivoting carriage
latch as shown by photos a & b
to the right.
a
b
Bekijk gratis de handleiding van Vestil A-LIFT-R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | A-LIFT-R |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9947 MB |
