Vestfrost VW-FD4A1400EU handleiding
Handleiding
Je bekijkt pagina 58 van 180
58
3.4 Water Inlet Hose Connection
1. Your machine may have either a single water inlet connection (cold) or double water inlet connection
(hot and cold) depending on the machine specications. The white capped hose should be connected
to cold water inlet and red capped hose to the hot water inlet (if applicable)..
- To prevent water leaks at the joints, either 1 or 2 nuts (depending on your machine’s specications)
are supplied in the packaging with the hose. Fit these nuts to the end(s) of the water inlet hose that
connect to the water supply.
2. Connect new water inlet hoses to a ¾ ˝, threaded tap.
- Connect the white capped end of the water inlet hose to the white water inlet valve on the rear side
of the machine and the red capped end of the hose to the red water inlet valve (if applicable)..
- Hand tighten the connections. If in any doubt, consult a qualied plumber.
- Water ow with pressure of 0. 1-1 Mpa will allow your machine to operate at optimum eciency
(pressure of 0. 1 Mpa means that more than 8 litres of water per minute will ow through a fully
opened tap).
3. Once you have made all of the connections, carefully turn the water supply on and check for leaks.
4. Ensure that the new water inlet hoses are not trapped, kinked, twisted, folded or crushed.
- If your machine has a hot water inlet connection, the temperature of the hot water supply should
not be higher than 70°C.
1 2 3 4
NOTE: Your Washing Machine must only be connected to your water supply using the supplied
new ll hose. Old hoses must not be reused.
Bekijk gratis de handleiding van Vestfrost VW-FD4A1400EU, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestfrost |
| Model | VW-FD4A1400EU |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 22882 MB |
