Handleiding
Je bekijkt pagina 40 van 196
40
Before using your fridge freezer for the rst time, please pay attention to the following points:
• The operating voltage for your fridge freezer is 220-240 V at 50Hz.
• The plug must be accessible after installation.
• Your fridge freezer may have an odour when it is operated for the rst time. This is normal and the
odour will fade when your fridge freezer starts to cool.
• Before connecting your fridge freezer, ensure that the information on the data plate (voltage
and connected load) matches that of the mains electricity supply. If in doubt, consult a qualied
electrician.
• Insert the plug into a socket with an ecient ground connection. If the socket has no ground
contact or the plug does not match, we recommend you consult a qualied electrician for
assistance.
• The appliance must be connected with a properly installed fused socket. The power supply (AC)
and voltage at the operating point must match with the details on the name plate of the appliance
(the name plate is located on the inside left of the appliance).
• We do not accept responsibility for any damages that occur due to ungrounded usage.
• Place your fridge freezer where it will not be exposed to direct sunlight.
• Your fridge freezer must never be used outdoors or exposed to rain.
• Your appliance must be at least 50 cm away from stoves, gas ovens and heater cores, and at least
5 cm away from electrical ovens.
• If your fridge freezer is placed next to a deep freezer, there must be at least 2 cm between them
to prevent humidity forming on the outer surface.
• Do not cover the body or top of fridge freezer with lace. This will aect the performance of your
fridge freezer.
• Clearance of at least 150 mm is required at the top of your appliance. Do not place anything on
top of your appliance.
• Do not place heavy items on the appliance.
• Clean the appliance thoroughly before use (see Cleaning and Maintenance).
• Before using your fridge freezer, wipe all parts with a solution of warm water and a teaspoon of
sodium bicarbonate. Then, rinse with clean water and dry. Return all parts to the fridge freezer
after cleaning.
• Use the adjustable front legs to make sure your appliance is level and stable. You can adjust the
legs by turning them in either direction. This must be done before placing food in the appliance.
• When the product is running, high temperature can be noticed on the side panels. This situation is
normal.
• In order for the product to work eciently, there must be some gap around it for air circulation. If
you are going to place the product in a recessed area on the wall, make sure that the gap should
be 100 mm between top surface and ceiling, 50 mm between walls and side panels.
• The distance between the appliance and back wall must be a maximum of 75 mm.
1.2 Installation warnings
Bekijk gratis de handleiding van Vestfrost VR-FB373-2E1BU, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestfrost |
| Model | VR-FB373-2E1BU |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 18354 MB |
