Vestel Minimalistik Inverter 24 handleiding

Airco

Vestel

52 pagina's

PDF beschikbaar

Handleiding

it.

Indoor Unit Exchanger Dr-

yer and Clean Up Function

(*)

button allows your air conditioner to

clean up the exchanger and dry the water

accumulated on the indoor unit exchan-

ger due to condensation of air when you

turn o your air conditioner in cooling

and dehumidiﬁcation modes. This fun-

ction starts as you turn o your air con-

ditioner and the fan works for 15 minutes.

The drying function does not run in the

heating mode.

WARNING: When the function is acti-

ve, do not try to turn the ﬁn on the air

outlet, it will be turned o automatically.

Ionizer Function (*)

You may enable the ionizer function by

the

button. Researches show that the

air with more anion make us feel more li-

vely and energetic. İonizer produces ani-

ons and diuse them to the environment

air for this purpose. To disable the functi-

on, press the

button again.

The negative ion emission may cause

dust like particles to accumulate on the

indoor unit of your air conditioner. Hen-

ce, make sure to clean your air conditio-

ner periodically (once a week) with a wet

and soapy wipe.

WARNING: During the deleting ope-

ration, certainly cut the power from the

fuse.

you want, use the

and buttons

at the centre of your remote. When the

desired time value is displayed on the re-

mote control display, the adjustments are

saved automatically in 3 seconds. If you

press the

button once again or turn

o the air conditioner before the time

set, these settings will be cancelled.

18:00

For auto power on and o feature to

work properly, the clock in the remote

should be adjusted correctly.

The durations you can set for power on

or o will increase and decrease 10 minu-

tes at a time. Press the

button when

the desired opening and closing time is

shown on the display. The time you set

will be saved. The Opening/Closing

time cannot be adjusted in the same way.

Sense Function (*)

With the button, you can adjust the

room temperature according to the tem-

perature at the location of the remote.

Your air conditioner sets the temperature

at the location of the remote as the desi-

red temperature and operates according

to this information. It will suce to put

your remote at a location where it can

communicate with your air conditioner

directly. In the sense mode, the remote

control and the air conditioner commu-

nicate every 4 minutes. If the communi-

cation is interrupted for 10 minutes, the

environment sensor on the air conditio-

ner enables. When the communication is

provided again, the sensor on the remote

control will be enabled and the function

will continue to operate until you cancel

Bekijk gratis de handleiding van Vestel Minimalistik Inverter 24, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.