Vestel H20 K handleiding
Handleiding
Je bekijkt pagina 9 van 18

6
If your vacuum cleaner stops,
switch it off from its power
button and check whether
there is any blockage on its air
inlet or outlet. Before starting
your vacuum cleaner, wait for
at least 40 minutes to for the
protection system to reset.
• If your vacuum cleaner does
not start to run or its safety
appliance stops the cleaner
again, contact the authorized
service for its inspection or
repair.
• WARNING: Always unplug
your appliance from the mains
before attaching or removing
its accessories.
• You should empty the dust
bag your of vacuum cleaner
in order get the most out
of the cleaner. Otherwise,
air flow and cleaning power
might be impaired. If the dust
accumulated inside the dust
bag reaches the maximum
level and the under-performs,
its dust bag should be replaced
with a new one.
• If its vacuuming power is still
poor even after its dust bag
is replaced, wash the air inlet
(Motor Protection) filter with
lukewarm water. To prevent
any electric shock, let the filter
dry before attaching it into its
place.
• Regularly clean the HEPA
filter. Do not wash in water.
• The HEPA filter can be cleaned
off of the dust via blowing air
or gently tapping on a hard
surface.
Points to be Considered
during Carrying and
Transportation
• During carrying and
transportation, your
appliance must be kept in
original box in order to protect
its components from damage.
• Keep the appliance in normal
position during carrying.
• Do not drop the appliance
during transportation and
protect it from impacts.
• Failures and damages occurred
during transportation
after delivery of product to
customer are not covered by
warranty.
Bekijk gratis de handleiding van Vestel H20 K, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Vestel |
Model | H20 K |
Categorie | Stofzuiger |
Taal | Nederlands |
Grootte | 2161 MB |