Handleiding
Je bekijkt pagina 9 van 19
EN - 9
2. INSTALLATION AND
PREPARATION FOR USE
WARNING : This appliance must be
installed by an authorised service
person or qualified technician,
according to the instructions in this guide
and in compliance with the current local
regulations.
• Incorrect installation may cause harm and
damage, for which the manufacturer accepts
no responsibility and the warranty will not be
valid.
•
•
Prior to installation, ensure that the local
distribution conditions (electricity voltage and
frequency and/or nature of the gas and gas
pressure) and the adjustments of the
appliance are compatible. The adjustment
conditions for this appliance are stated on
the label.
The laws, ordinances, directives and
standards in force in the country of use are to
be followed (safety regulations, proper
recycling in accordance with the regulations,
etc.).
Instructions for the Installer
General instructions
•
•
After removing the packaging material from
the appliance and its accessories, ensure
that the appliance is not damaged. If you
suspect any damage, do not use it and
contact an authorised service person or
qualified technician immediately.
Make sure that there are no flammable or
combustible materials in the close vicinity,
such as curtains, oil, cloth etc. which may
catch fire.
• The worktop and furniture surrounding the
appliance must be made of materials
resistant to temperatures above 100°C.
• If a cooker hood or cupboard is to be
installed above the appliance, the safety
distance between cooktop and any
cupboard/cooker hood should be as shown
below.
HOB
Minimum
42 cm
Minimum
42 cm
Minimum
65 cm (with
hood)
Minimum 70
cm (without
hood)
• The appliance should not be installed directly
above a dishwasher, fridge, freezer, washing
machine or clothes dryer.
• If the base of the appliance is accessible by
hand, a barrier made from a suitable
material must be fitted below the base of the
appliance, ensuring that there is no access to
the base of the appliance.
2.1 inStallation of the hob
The appliance is supplied with an installation
kit including adhesive sealing material, fixing
brackets and screws.
• Cut the aperture dimensions as indicated
in the figure. Locate the aperture on the
worktop so that, after the hob is installed,
the following requirements are followed.
B (mm) 590 min. A (mm) 50
T (mm) 520 min. C (mm) 50
H (mm) 41-47.5 min. E (mm) 500
C1 (mm) 560 min. F (mm) 10
C2 (mm) 490 G (mm) 20
D (mm) 50 I (mm) 25
J (mm) 5
Bekijk gratis de handleiding van Vestel AO-6330 B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestel |
| Model | AO-6330 B |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 1221 MB |
