Handleiding
Je bekijkt pagina 11 van 19
EN - 11
• Insert the appliance into the aperture.
2.2 Electrical Connection and Safety
WARNING: The electrical connection of
this appliance should be carried out by an
authorised service person or
qualified electrician, according to the
instructions in this guide and in compliance with
the current local regulations.
WARNING: THE APPLIANCE MUST BE
EARTHED.
• Before connecting the appliance to the power
supply, the voltage rating of the appliance
(stamped on the appliance identification
plate) must be checked for correspondence to
the available mains supply voltage, and the
mains electric wiring should be capable of
handling the appliance’s power rating (also
indicated on the identification plate).
• During installation, please ensure
that isolated cables are used. An incorrect
connection could damage your appliance. If
the mains cable is damaged and needs to be
replaced this should be done by a qualified
person.
• Do not use adaptors, multiple sockets and/or
extension leads.
• The supply cord should be kept away from
hot parts of the appliance and must not be
bent or compressed. Otherwise the cord may
be damaged, causing a short circuit.
• If the appliance is not connected
to the mains with a plug, a all-pole
disconnector switch (with at least 3 mm
contact spacing) must be used in order to
meet the safety regulations.
• The fused switch must be easily accessible
once the appliance has been installed.
• Ensure all connections are adequately
tightened.
• Fix the supply cable in the cable clamp and
then close the cover.
• The terminal box connection is placed on the
terminal box.
4
4
N
N PE
PE
L3 L2 L1
L
5 5
3
3
2
2
1
1
Bekijk gratis de handleiding van Vestel AO-6330 B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestel |
| Model | AO-6330 B |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 1221 MB |
