Handleiding
Je bekijkt pagina 21 van 28
EN - 21
5. Select the desired finishing time using the
“+” and “-” keys. Add the cooking period to
the current time of day. You can set a time of
up to 23 hours and 59 minutes after this. Use
the “+” and “-” buttons to set the desired
finishing time.
6. The current time will reappear on the
screen, the symbols “ ” and “ ” will remain
illuminated.
The operating time will be calculated and the
oven will automatically start. At this state,
symbol “
” will disappear. When the timer
reaches zero, the oven will switch off and an
audible warning will sound. The symbol “ ”
will flash. Turn both control knobs to the “0”
position and press any key on the timer to stop
the sound. Press “MODE” the “ ” symbol will
disappear and the timer will switch back to
manual function.
Cooking Temperature Adjustment
1. Select the desired cooking function using the
control knob.
2. Select the desired cooking temperature
using the temperature adjust knob.
3. While cooking temperature is adjusting,
screen will be displayed current selected
cooking temperature and TEMPERATURE
SYMBOL(
) is illuminated. While the cooking
temperature is adjusting, current selected
cooking temperature is displayed on screen for
3seconds.
Sound Adjustment
To adjust the volume of the audible warning
sound, while the current time of day is
displayed, press “-” key for 5seconds and the
dot in the middle of the screen will start to
flash. Press “-” to display current signal sound.
After this, each time the “-” button is pressed,
a different signal will sound and screen is
displayed value one of the “ OFF”, “tn01”,
“tn02”, “tn03”, “tn04” sequentially. There
are four different types of signal sounds. Select
the desired sound and do not press any other
buttons. After a short time, the selected sound
will be saved.
Key Lock Function
The key lock is used to avoid unintentional
changes to oven settings. To activate the key
lock, touch the KEY LOCK(
) sensor button for
5 seconds until you see Key Lock symbol on the
display. To deactivate the key lock, touch the
KEY LOCK( ) sensor for 5 seconds until the
key lock symbol disappears from the display.
When the key lock is engaged, only the Remote
Control( ) sensor button can be activated. All
other buttons will remain locked.
WIFI Configuration and Remote Control
In order to control the oven remotely, wifi
configuration of the oven must first be done.
Press REMOTE CONTROL(
) button for
5 seconds. When your device is set to
configuration mode, “CF” message will be
displayed. Wifi setup is only done when you
first set up the mobile device you want to use
or when the password of the wifi network you
connect the oven to is changed. For oven which
wifi configuration is completed, the remote
control is activated and deactivated when the
remote control button is touched. When remote
control is activated, remote control icon will
appear on the screen and all keys are locked
except REMOTE CONTROL( ) and KEY LOCK
( ) sensor buttons.
Bekijk gratis de handleiding van Vestel AF-861052 G WIFI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestel |
| Model | AF-861052 G WIFI |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 2394 MB |
