Handleiding
Je bekijkt pagina 32 van 75
English - 31 -
message will be displayed. Select Yes
and press OK again. If the image is
suitable (*) you will see it on the screen
during the TV’s next boot up.
Note: You can use the Restore Default Boot
Logo option in the Settings>System>More menu
to restore the default boot logo. If you perform
factory reset, the boot logo will also be restored
to its default.
(*) Images must have an aspect ratio between
4:3 to 16:9 and they must be in .jpeg or .jpg
file formats. The image cannot be set as boot
logo, if its resolution doesn’t appear on the
info banner.
FollowMe TV
With your mobile device you can
stream the current broadcast from
your smart TV using the FollowMe TV
feature. Install the appropriate Smart
Center application to your mobile
device. Start the application.
For further information on using this
feature refer to the instructions of the
application you use.
Note: Depending on model, your TV may not
support this function. The application may not
be compatible with all mobile devices. Both of
the devices must be connected to the same
network. This feature is only functional on TV
source.
CEC
This function allows the user to control
the CEC-enabled devices, that are
connected through HDMI ports by
using the remote control of the TV.
The CEC option in the Settings>Devices
menu should be set as Enabled at first.
Press the Source button and select
the HDMI input of the connected CEC
device from the Sources List menu.
When a new CEC source device is
connected, it will be listed in Sources
List menu with its own name instead of
the connected HDMI port’s name (such
as DVD Player, Recorder 1, etc.).
The TV remote is automatically able
to perform the main functions after
the connected HDMI source has been
selected. To terminate this operation
and control the TV via the remote
again, press and hold the “0-Zero”
button on the remote control for 3
seconds.
You can disable the CEC functionality
by setting the related option under the
Settings>Devices menu accordingly.
The TV supports ARC (Audio Return
Channel). This feature is an audio link
meant to replace other cables between
the TV and an audio system (A/V
receiver or speaker system).
When ARC is active, the TV will mute
its other audio outputs, except the
headphone jack, automatically and
volume control buttons are directed
to the connected audio device. To
activate ARC set the Sound Output
option in the Settings>Sound menu
as HDMI ARC.
Note: ARC is supported only via the HDMI2
input.
System Audio Control
Allows an Audio Amplifier/Receiver to
be used with the TV. The volume can
be controlled using the remote control
of the TV. To activate this feature
Bekijk gratis de handleiding van Vestel 65QT9850, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestel |
| Model | 65QT9850 |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 7914 MB |
