Handleiding
Je bekijkt pagina 23 van 82
English - 22 -
and Polarisation parameters under
the Transponder option accurately.
Scan Type: You can perform a scan
for free or encrypted channels only.
If the Only Free Channels option
is selected, encrypted channels will
not be installed. Select All to scan
all channels.
Store Type: You can select to store
TV channels (referred to as ‘Digital
Channels’ in the menu) or radio
channels only. Select All to store all
channels.
Transponder: Adjust the Frequency,
Symbol Rate (Ksym/s) and
Polarisation parameters for the
selected satellite if necessary.
LNB Configurations: Set the
parameters for LNB. For DiSEqC
antenna type select the correct
DiSEqC port corresponding to your
satellite system. Set other parameters
in accordance with your satellite
system if necessary.
Signal Quality: The signal quality
status is displayed as a percentage.
Signal Level: The signal level status
is displayed as a percentage.
Press the Back/Return button and
select next satellite you want to set.
After you completed the conguration
changes, highlight Next on the LNB
List screen and press OK or the Right
directional button to proceed.
If Load Preset List option is selected
in the previous step next steps will be
skipped and the preset channel list
installation will start. If the correct
satellite has not been selected for
SatcoDX installation, a warning
dialogue will be displayed on the
screen. The satellite/s that can be
selected will be listed. Press OK to close
the dialogue and then set the satellite
accordingly.
Channel Scan screen will be displayed
next. Select Skip Scan to proceed
without performing a scan and
complete the initial setup. Select
Scan and press OK or the Right
directional button to start the search.
While the search continues you can
press the Back/Return button to stop
the search. Then highlight Skip Scan
and press OK or the Right directional
button to complete the setup. The
channels that have already been found
will be stored in the channel list.
D-Smart Installation
You can search and store D-Smart
satellite channels. Set the tuner mode
as Satellite. On the next screen
set the antenna type as mentioned
above. Then the Select Operator
screen will be displayed. Select the
operator accordingly and press OK
or the Right directional button to
proceed.
TKGS Installation
Note: TKGS stands for Türksat Kanal Güncelleme
Sistemi. The country option should be set as Turkey
in the previous steps of the initial setup process.
• Set the Tuner Mode as Satellite.
Bekijk gratis de handleiding van Vestel 65QMG9950, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestel |
| Model | 65QMG9950 |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 8193 MB |
