Handleiding
Je bekijkt pagina 10 van 81
English - 9 -
2. Insert the screws provided and
tighten them gently until the
pedestal(s) is/are properly tted.
Removing the pedestal from the TV
Be sure to remove the pedestal in the
following way when using the wall
mount bracket or repacking the TV.
• Put the TV onto a work table with
the screen panel down on a clean
and soft cloth. Leave the pedestal(s)
protruding over the edge of the
surface.
• Unscrew the screws that fix the
pedestal(s).
• Remove the pedestal(s).
When using the wall mount bracket
Your TV is also prepared for a VESA-
compliant wall mount bracket. If it is
not supplied with your TV, contact
your local dealer to purchase the
recommended wall mount bracket.
Holes and measurements for the wall
mount bracket installation;
A VESA WALL MOUNT MEASUREMENTS
B
Hole Paern
Sizes (mm)
W H
200 200
C Scr
ew Sizes
F G
D Length (X)
min. (mm) 7 5
max. (mm) 10 6
E Thread (Y) M6
Antenna Connection
Connect the aerial or cable TV plug
to the aerial input (ANT) socket or
satellite plug to the satellite input
(LNB) socket located on the rear-left
side of the TV.
Rear-left side of the TV
ANT
LNB
If you want to connect a device to the TV, make sure
that both the TV and the device are turned o before
making any connection. After the connection is done,
you can turn on the units and use them.
Bekijk gratis de handleiding van Vestel 55QG9950, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestel |
| Model | 55QG9950 |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 8518 MB |
