Handleiding
Je bekijkt pagina 50 van 75
English - 49 -
Connectivity
Wired Connectivity
To Connect to a Wired Network
• You must have a modem/router
connected to an active broadband
connection.
• Connect your TV to your modem/
router via an Ethernet cable. There
is a LAN port at the rear-left side of
your TV.
1
Broadband ISP connection
2
LAN (Ethernet) cable
3
LAN input on the rear-left side of
the TV
• You might be able to connect your
TV to your LAN depending on your
network’s configuration. In such
a case, use an Ethernet cable to
connect your TV directly to the
network wall outlet.
1
Network wall socket
2
LAN input on the rear-left side of
the TV
Configuring Wired Device Settings
To configure wired connection settings
go to the Settings>Network menu.
Network Type
Set Network Type as Wired Device
if you are connecting via an Ethernet
cable.
Internet Speed Test
Highlight Internet Speed Test and
press the OK button. TV will check the
internet connection bandwidth and
display the result when complete.
Advanced Settings
Highlight Advanced Settings and
press the OK button. On the next
screen you can change the IP and DNS
settings of the TV. Highlight the desired
one and press Left or Right button to
change the setting from Automatic
to Manual. Now you can enter the IP
and / or DNS values manually. Select
the related item in the drop down
menu and enter the new values using
the numeric buttons of the remote.
Bekijk gratis de handleiding van Vestel 50UT9850, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestel |
| Model | 50UT9850 |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 8015 MB |
