Handleiding
Je bekijkt pagina 39 van 75
English - 38 -
Installation Menu Content
TKGS Installation
Displays the TKGS Installation menu options. This option may not be available depending on the
selected Satellite Operator during the first time installation process. If not, perform factory reset
using the related option in the Installation menu and select the Satellite Operator as TKGS.
Automatic Channel
Scan (Retune)
Displays automatic tuning options. D. Aerial: Searches and stores aerial DVB stations. D. Cable:
Searches and stores cable DVB stations. Analogue: Searches and stores analogue stations.
Satellite: Searches and stores satellite stations.
Manual Channel Scan
This feature can be used for direct broadcast entry.
Network Channel Scan
Searches for the linked channels in the broadcast system. D. Aerial: Searches for aerial
network channels. D. Cable: Searches for cable network channels. Satellite: Searches for
satellite network channels.
Analogue Fine Tune
You can use this setting for fine tuning analogue channels. This feature is not available if no
analogue channels are stored and if currently watched channel is not an analogue channel.
Satellite Settings
Displays satellite settings. Satellite list: Displays available satellites. You can Add, Delete
satellites or Edit satellite settings on the list. Press OK to open the Options menu. Antenna
installation: You can change satellite antenna settings and/or start a satellite scan. Press OK
to open the Options menu. Satellite Channel Table: You can upload or download satellite
channel table data using the related options.
Installation Settings
(optional)
Displays installation settings menu. Standby Mode Search (*): Your TV will search for new or
missing channels while in standby. Any new found broadcasts will be shown. Dynamic Channel
Update (*): If this option is set as Enabled, the changes on the broadcasts such as frequency,
channel name, subtitle language, etc. will be applied automatically while watching.
(*) Availability depends on model.
Clear Service List
Use this setting to clear channels stored. This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.
Select Active Network
This setting allows you to select only the broadcasts within the selected network to be listed in
the channel list. This feature is available only for the country option of Norway.
Signal Information
You can use this menu item to monitor signal related information such as signal level/quality,
network name, etc. for available frequencies.
Factory Reset
Deletes all stored channels and settings, resets TV to factory settings.
Bekijk gratis de handleiding van Vestel 50UT9850, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestel |
| Model | 50UT9850 |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 8015 MB |
