Handleiding
Je bekijkt pagina 10 van 75
English - 9 -
Note that once the Standby Mode
Picture option is set as On, the
function of the Standby button on the
remote will change. After this you will
need to press and hold the button to
switch the TV into standby mode while
the TV is in normal operating mode.
If there are more than 1 picture file
available in the folder all picture files
will be displayed as a slide show in
succession. If the necessary folder is
not created or there isn't any picture
file in the folder, a warning message
will be displayed on the screen for a
few seconds and then disappear.
In standby mode picture state the
backlight level of the screen will be
decreased by 50 % and Smart Center
features will not be usable, if Smart
Center is available for your TV model.
To switch your TV from standby mode
picture state back to normal operating
mode press the Standby button on the
remote briey.
Beside the remote control you can
also use the control unit on the TV
to switch into standby mode picture
state and back to normal operating
mode. In order to do that follow the
same instructions as described in the
TV Control & Operation section for
switching the TV into the standby
mode. Note that you will not be able to
switch the TV into standby mode using
the control unit on the TV while the TV
is in standby mode picture state.
Note: The availability of this feature depends
on the TV model and its features.
Refer to the Supported File Formats for USB
Mode section for the supported media file
formats.
Standby Notifications
If the TV does not receive any input
signal (e.g. from an aerial or HDMI
source) for 3 minutes, it will go into
standby. When you next switch-on, the
following message will be displayed:
“TV switched to stand-by mode
automatically because there was
no signal for a long time.” You can
disable this functionality by setting
the Timer of No Signal option in the
Settings>Devices menu accordingly.
The Auto Power Down option (in the
Settings>System >More menu) could
have been set to a value between 1
and 8 hours by default. If this setting
is not set as O and the TV has been
left on and not been operated during
the set time, it will switch into standby
mode after the set time has expired.
When you next switch-on the TV, the
following message will be displayed:
“TV switched to stand-by mode
automatically because no operation
was made for a long time.” Before
the TV switches into standby mode a
dialogue window will be displayed. If
you do not press any button the TV
will switch into the standby mode after
a waiting period of about 5 minutes.
You can highlight Yes and press OK
to switch the TV into standby mode
immediately. If you highlight No and
Bekijk gratis de handleiding van Vestel 50UT9850, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestel |
| Model | 50UT9850 |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 8015 MB |
