Handleiding
Je bekijkt pagina 12 van 58
English - 11 -
Turning On/Off the TV
Connect power
IMPORTANT: The TV set is designed to operate on 220-
240V AC, 50 Hz socket.
After unpacking, allow the TV set to reach the ambient
room temperature before you connect the set to the mains.
Plug one end (the two-hole plug) of the supplied detachable
power cord into the power cord inlet on the rear side of
the TV as shown above. Then plug the other end of the
power cord into the mains socket outlet. The TV will switch
to standby mode.
Note: The position of the power cord inlet may dier depending
on the model.
To switch on the TV from standby
If the TV is in standby mode the standby LED lights up. To
switch on the TV from standby mode either:
•
P
ress the Standby, Guide, Netix or Prime Video
button on the remote control.
•
P
ress the control button on the TV.
The TV will then switch on.
Note: The remote control buttons may vary depending on models/
countries/regions.
To switch the TV into standby
• Press the Standby button on the remote control.
• Press the control button on the TV, Mixbar menu options
will be displayed. The focus will be on the current input
source option. Press the button consecutively until the
Power O option is highlighted. The TV will switch into
standby mode.
To switch o the TV
To power down the TV completely, unplug the power cord
from the mains socket.
TV Control & Operation
Your TV has a single control button. This button allows
you to control the Inputs / Channel Up-Down / Volume
Up-Down and Power O-On functions of the TV.
Note: The position of the control button may dier depending
on the model.
Operating with the Control Button
• Press the control button to display the Mixbar menu
options.
•
Then
press the button consecutively to move the focus
to the desired option if needed.
•
T
o use the Volume Up-Down function, press and hold the
button for about 2 seconds.
To turn the TV o: Press the control button to display
the Mixbar menu options, the focus will be on the current
input source option. Press the button consecutively until
the Power O option is highlighted.
To turn on the TV: Press the control button, the TV will
turn on.
To change volume: Press the control button to display
the Mixbar menu options and then press the button
consecutively to move the focus to Vol+ or Vol- option.
Press and hold the button to increase or decrease the
volume.
To change channel (on TV input source, Live TV mode):
Press the control button to display the Mixbar menu options
and then press the button consecutively to move the focus
to CH+ or CH- option.
To change input source: Press the control button to
display the Mixbar menu options, the focus will be on the
current input source option. Scroll through the available
input sources by pressing the button until the desired input
source option is highlighted.
Note: Live TV settings menu OSD in Live TV mode cannot be
displayed via the control button.
Operation with the Remote Control
Press the Home button to display or return to the Home
screen of your TV. Use the directional buttons to move the
focus, proceed, adjust some settings and press OK to make
selections in order to make changes, set your preferences,
enter a sub-menu, launch an application, etc. Press Back/
Return to return to the previous menu screen.
Bekijk gratis de handleiding van Vestel 43UV9750, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestel |
| Model | 43UV9750 |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 7071 MB |
