Handleiding
Je bekijkt pagina 35 van 78

English - 34 -
Channel Delete: Highlight the desired
channel/s on the list and press OK or
the Yellow button to select/unselect.
Then press the Blue button to delete
the selected channel/s. When the
confirmation dialogue appears,
highlight YES and press OK to proceed.
Analogue Channel Fine-tune: Select
the channel you want to adjust from
the list and press OK. Then change
the frequency using the Left/Right
directional buttons to find optimal
reception. Press the Back/Return
button to save and exit. When the
confirmation dialogue appears,
highlight OK and press OK to proceed.
Clear Channel List: Delete all channels
stored in the channel list. A dialogue
will be displayed for confirmation.
Highlight OK and press OK to proceed.
Highlight Cancel and press OK to
cancel.
Note: Some options may not be available
and appear as greyed out depending
on the operator selection and operator
related settings. If you performed
TKGS installation you can remove the
restrictions on configuration of the
channel list using the Operate Mode
option in the TV options > Advanced
Options > TKGS menu. Set this option
as TKGS O or Customisable to enable
channel list configuration.
Channel Installation Mode
Set this option as Preferred Satellite
or General Satellite. The channel
list will also change depending on
the selected option here. In order to
watch the channels on the satellite you
want, this option should be selected
accordingly. Set to Preferred Satellite
to watch operator channels, if you have
performed an operator installation.
Set to General Satellite to watch
other satellite channels, if you have
performed a normal installation.
Auto Channel Update
Turn the auto channel update function
on or o.
Channel Update Message
Turn the channel update message
function on or o.
Parental Controls
(*) To enter this menu PIN should be
entered first. Use the PIN that you have
defined during the initial setup process. If
you have changed the PIN after the initial
setup use that PIN. If you didn’t set a
PIN during the initial setup, you can use
the default PIN. The default PIN is 1234.
Some options may not be available or vary
depending on the country selection during
the initial setup. The related options of
this menu may not be available or appear
greyed out if the channel installation is not
completed and no channels are installed.
Channels Blocked: Select channel/s
to be blocked from the channel list.
Highlight a channel and press OK to
select/unselect. To watch a blocked
channel PIN should be entered first.
Programme Restrictions: Block
programmes according to the age
rating information that is being
Bekijk gratis de handleiding van Vestel 24HA9950S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Vestel |
Model | 24HA9950S |
Categorie | Televisie |
Taal | Nederlands |
Grootte | 7400 MB |