Handleiding
Je bekijkt pagina 23 van 78
English - 22 -
Polarisation parameters for the
selected satellite if necessary.
LNB Configurations: Set the
parameters for LNB. For DiSEqC
antenna type select the correct
DiSEqC port corresponding to your
satellite system. Set other parameters
in accordance with your satellite
system if necessary.
Signal Quality: The signal quality
status is displayed as a percentage.
Signal Level: The signal level status
is displayed as a percentage.
Press the Back/Return button and
select next satellite you want to set.
After you completed the configuration
changes, highlight Next on the LNB
List screen and press OK or Right
directional button to proceed.
If Load Preset List option is selected
in the previous step next steps will be
skipped and the preset channel list
installation will start. If the correct
satellite has not been selected for
SatcoDX installation, a warning
dialogue will be displayed on the
screen. The satellite/s that can be
selected will be listed. Press OK to close
the dialogue and then set the satellite
accordingly.
Channel Scan screen will be displayed
next. Select Skip Scan to proceed
without performing a scan and
complete the initial setup. Select Scan
and press OK or the Right directional
button to start the search. While
the search continues you can press
the Back/Return button, highlight
Skip Scan and press OK or Right
directional button to stop the search.
The channels that have already been
found will be stored in the channel list.
When the initial setup is completed a
message will be displayed. Press OK to
finish the setup.
You will be asked to give your consent
to the collection of your data. Read
the text on the screen for detailed
information. Highlight Accept and press
OK to give your consent and proceed.
To skip without giving your consent,
select Next. You can change this
setting later using the Settings>Device
Preferences>Manufacturer Usage &
Diagnostics menu.
Home Screen will be displayed. You can
press the Exit button on the remote to
switch to Live TV mode and watch TV
channels.
Home Screen
To enjoy the benefits of your Android
TV, your TV must be connected to
the Internet. Connect the TV to a
home network with a high-speed
Internet connection. You can connect
your TV wirelessly or wired to your
modem/router. Refer to the Network
and Internet and Connecting to
the Internet sections for further
information on how to connect your
TV to the Internet.
The Home menu is the centre of your
TV. From the Home menu, you can
Bekijk gratis de handleiding van Vestel 24HA9950S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestel |
| Model | 24HA9950S |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 7400 MB |
