Handleiding
Je bekijkt pagina 32 van 78
English - 31 -
channel other options may also be
editable. Press OK or the Yellow
button to edit the highlighted channel.
You can press the Blue button to delete
the highlighted channel.
(*) The selected channel number should
not be used for another channel in the
channel list. You may need to set the
LCN option to O in order to change
the channel number.
Channel Delete: Highlight the desired
channel/s on the list and press OK or
the Yellow button to select/unselect.
Then press the Blue button to delete
the selected channel/s. When the
confirmation dialogue appears,
highlight YES and press OK to proceed.
Clear Channel List: Delete all channels
stored in the channel list. A dialogue
will be displayed for confirmation.
Highlight OK and press OK to proceed.
Highlight Cancel and press OK to
cancel.
Input Source - Satellite
Satellite Re-scan: Start a satellite
scan beginning with the antenna
selection screen. When this scanning
option is preferred, some scanning
configurations will not be available
and thus the preferences you made
during the initial setup process may
not be changed.
For the General Satellite channel
installation mode the SatcoDX Scan
option may also be available here. For
standard installation select Normal
scan. For SatcoDX installation select
SatcoDX Scan and copy the relevant
sdx file into the root directory of an
USB storage device and connect it to
your TV. Highlight this option and press
OK. Download SatcoDX option will
be highlighted, press OK to continue.
Select the sdx file from the connected
USB storage device on the next screen
and press OK. Satellite selection screen
will be displayed. The status of the
first satellite option will appear as On.
Highlight that satellite option and press
OK. Set the parameters corresponding
to your system and correct satellite
and press the Back/Return button
to return to the satellite selection
screen. Highlight Next and press OK
to proceed with the SatcoDX channel
list installation. If the selected satellite
is not correct for SatcoDX installation,
a warning dialogue will be displayed on
the screen. The satellite/s that can be
selected will be listed. Press OK to close
the dialogue and press Back/Return
to return to satellite selection screen.
Then set the satellite accordingly.
Satellite Add: Add satellite and
perform a satellite scan. This menu
option will be active, if Channel
Installation Mode is set to General
Satellite.
Satellite Update: Search for any
updates by repeating the previous
scan with the same settings. You
will also be able to configure these
settings before the scan. If Channel
Installation Mode is set to Preferred
Satellite this option may be named
Bekijk gratis de handleiding van Vestel 24HA9950M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestel |
| Model | 24HA9950M |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 7467 MB |
