Vertiv VR3100TAA handleiding

Handleiding

123456789101112131415161718192021222324252627282930/ 30

Afdrukken

Je bekijkt pagina 5 van 30

1 Important Safety Instructions

Save These Instructions

This manual contains important instructions that must be closely followed during installation of this unit to maintain

compliance with agency listings. Read all safety and operating instructions. Adhere to all warnings on the unit and in this

manual. Follow all operating and user instructions.

WARNING! Risk of handling heavy unit. Can cause equipment damage, injury or death. Read all instruction

before beginning.

WARNING! Risk of top-heavy unit falling over. Improper handling can cause equipment damage, injury or

death. Only properly trained and qualified personnel wearing appropriate OSHA-approved personal

protection equipment (PPE) should attempt to move, lift, remove packaging from or prepare unit for

installation. Read all instructions before attempting to move, lift, remove packaging from or prepare the unit

for installation.

This product is designed for commercial/industrial use only. This product is not intended for use with life support or other U.S.

FDA designated “critical” devices. Maximum loads must not exceed those specified in this manual. The maximum load rating

for the Vertiv™ VR is found in the "Vertiv™ VR Guide Specifications," SL-11425GS. Do not exceed the static load rating.

Install and operate in a clean environment, free from moisture, flammable liquids, gases and corrosive substances. The Vertiv™

VR must be installed on a flat, level surface for proper assembly and operation.

Ensure that the rack has proper ventilation. Never block or insert objects into the ventilation holes or other openings. Maintain

minimum clearances as specified in this manual.

Provide the minimum space between the accessories/components and the housing. This spacing shall be maintained for safe

operation of the equipment when installed in accordance with the National Electric Code, ANSI/NFPA 70.As appropriate, all

wiring and equipment should be installed in accordance with NFPA 70, “National Electrical Code,” and the applicable sections

of ANSI C2, “National Electrical Safety Code."

We recommend that casters only be used to move empty racks.

1 Important Safety Instructions

1

Vertiv™ VR Installer/User Guide

123456789101112131415161718192021222324252627282930/ 30

Bekijk gratis de handleiding van Vertiv VR3100TAA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Caratteristiche Prodotto

Andere merken in Niet gecategoriseerd