Veritas Power Stitch 32 TITAN handleiding
Handleiding
Je bekijkt pagina 8 van 56
08
DANGER! DANGER OF LIFE AND ACCIDENTS FOR TODDLERS AND CHILDREN!
• Never leave children unattended with the packaging material. The packaging material poses a
choking hazard. Children often underestimate the dangers. Always keep children away from the
packaging material. This device is not a toy.
• Always disconnect the power plug before making any changes to the settings or changing acces-
sories.
• Never operate the device if the ventilation openings are blocked. Keep the ventilation openings
of the device and foot controller free of lint, dust and fabric waste.
• Always turn o the device when performing adjustments or work in the area of the needle, such
as threading or changing needle, threading or changing bobbin, changing the presser foot and
so on.
Accessories
• Crown Technics GmbH can only guarantee the proper functioning of the device if the appropriate
accessories are used.
• Only use the original power cord supplied with the sewing and embroidery machine. Other power
cords may damage the device. Do not use the supplied power cord with other devices.
Before use
Obtaining practical information is recommended before using the device for the rst time. If you are
not familiar with the operation of sewing and embroidery machines, we recommend that you attend
an introductory course.
Always check that the mains voltage matches the voltage indicated on the labelling of the device.
During use
1. Check the power cord for damage before use. If the power cord is damaged, replace it with an
original cord that is only available from the manufacturer or its customer services.
2. Never leave the device unattended when it is switched on. Unplug the device if you leave it
unattended to avoid injury from accidental switch-on.
3. Keep body parts, hair, clothing and gloves away from moving parts. Make sure that you do not
come into contact with the running needle.
4. Do not continue to use worn needles.
5. If the power cord is damaged or cut during work, do not touch the power cord but disconnect the
power plug immediately.
6. Do not continue to use the device if the power cord is damaged; replace it with a new original
power cord. Other power cords may damage the device.
7. In the event of an electrical or mechanical malfunction, switch o the device immediately and
disconnect the power plug.
After use
When leaving the sewing and embroidery machine, immediately disconnect the mains plug from the
socket. Disconnect the mains plug from the socket before carrying out maintenance and cleaning
work.
Selection of an installation site
Avoid exposing the device to extremely dusty, dirty or greasy areas such as kitchens, garages or
boiler rooms. Dust and grease can aect the operation. Do not install in damp or wet rooms such as
bathrooms. Always install the device in dry rooms only. Do not install in areas where the temperature
is below 5°C or above 40°C.
Bekijk gratis de handleiding van Veritas Power Stitch 32 TITAN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Veritas |
| Model | Power Stitch 32 TITAN |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 13180 MB |
