Veritas Power Stitch 32 TITAN handleiding
Handleiding
Je bekijkt pagina 38 van 56
38
1-Step Buttonhole stitch
Buttonholes can be adapted to the size of the button.
For stretch fabric or thin fabric, it is recommended to use a stabilizer/auxiliary material for a better
buttonhole sewing. Lower the thread tension of the upper thread slightly.
Mark the positions of the buttonhole on the fabric.
The maximum buttonhole length is 3cm. (Total of diameter
+ thickness of button.)
The size of the buttonhole is determined by the button
inserted in the button plate.
Pull the button holder plate to the back, and place the
button in it. Push back the button holder plate against the
button to hold it tight.
Attach the buttonhole foot.
Pull the thread through the hole in the presser foot so that it
is under the presser foot.
Position the fabric under the presser foot so that the
centerline’s mark is aligning with the center of the
buttonhole foot.
①
Starting point
Select the buttonhole stitch. Adjust the stitch width and the
stitch length to the desired width and density.
6
Use
the buttonhole foot.
Note
Please use the same fabric of the project and do a
sewing test in advance.
Lower the buttonhole lever and gently push it back.
①
Buttonhole lever
Slightly hold the end of the upper thread and start sewing.
Pull two lines together.
Note
- Gently feed the fabric by hand.
- Before stopping, the machine will automatically sew a
reinforcement stitch after the buttonhole is sewn.
Bekijk gratis de handleiding van Veritas Power Stitch 32 TITAN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Veritas |
| Model | Power Stitch 32 TITAN |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 13180 MB |
