Veritas Power Stitch 21 DENIM handleiding
Handleiding
Je bekijkt pagina 44 van 56
44
v
Preparation for embroidering and
monogramming
* The embroidery hoop is not included with the
machine..
Move the feed dog lever to lower the feed dogs.
①
Lowered position
Free motion sewing, embroidery and monogramming
Remove the presser foot and the presser foot holder.
Draw the desired lettering or design on the surface of
the fabric.
Stretch the fabric between the embroidery hoop as
rmly as possible.
Place the fabric under the needle. Make sure the
presser foot bar is down to its lowest position.
Turn the handwheel towards you to bring up the
bobbin thread through the fabric. Sew a few securing
stitches at the starting point.
Hold the hoop with thumb and forenger of both hands
while pressing the material with the middle and third
nger and supporting the outside of the hoop with your
small nger.
n
Attention
Keep ngers away from moving parts, especially
needles.
Note
When you nish the work, move the feed dog lever
to raise the feed dogs.
1
Raised position
v
Darning
First sew around the edges of the hole to secure the
threads. Stitch across the opening moving the hoop
backward and forward under the needle.
Overlap the outline stitching at each end of the area,
keeping the lines of stitching closely spaced and even
in length. When the opening is lled, turn the work and
cover the area with crosswise lines of stitching.
Note
Free motion darning is accomplished without the
sewing machine internal feed system. Movement
of the fabric is controlled by the operator. It is
necessary to coordinate sewing speed and
movement of fabric.
Bekijk gratis de handleiding van Veritas Power Stitch 21 DENIM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Veritas |
| Model | Power Stitch 21 DENIM |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 13180 MB |
