Veritas Power Stitch 21 DENIM Handleiding (56 Pagina's)

Handleiding

29

Starting to sew

2. Turn the handwheel towards you (counter-

clockwise) to bring the needle to highest position.

3. Raise the presser foot lifter. Turn the pattern

selection dial to select a stitch.

4. Place the fabric under the presser foot, pass

the thread under the presser foot, and then pull

out about 10cm of thread toward the rear of the

machine.

①

10cm

5. Turn the handwheel toward you (counter-clockwise)

to lower the needle into the fabric at the beginning

of the stitching.

Make sure you follow the needle/fabric/thread combinations and use the suggested presser foot before

sewing.

6. Lower the presser foot lifter.

1. Turn the power switch to on ("I").

ON

OFF

7. Slowly press down the foot control to start sewing.

Release the foot control to stop the machine.

Note

You can use reverse sewing for back tacking and

reinforcing seams by pressing the reverse sewing

lever. Please refer to "Useful skills" chapter for more

information.

Bekijk gratis de handleiding van Veritas Power Stitch 21 DENIM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.