Veritas Power Stitch 21 DENIM handleiding
Handleiding
Je bekijkt pagina 12 van 56
12
Connecting machine to power source
2
ON
OFF
1
Make sure that:
• the power cord is unplugged from the socket when the
sewing machine is not in use.
• you contact a qualied electrician if you have any doubt
about connecting the sewing machine to the power
supply.
• the power plug is pulled out of the socket when you are
not using the power supply.
• the sewing machine is only used with the appropriate
foot controller.
1. Connect the machine into an electric outlet.
2. Turn on the device and the illumination by setting the
main power switch to the "ON" position ("I").
v
Foot control
When the machine is o, insert the foot control plug into its
connector on the machine. Turn on the machine, and then
slowly press down the foot control to start sewing. Release
the foot control to stop the machine.
o
te
Consult a qualied electrician if in doubt as to connect
the machine to the power source.
Free arm
Free-arm sewing is convenient for sewing tubular
areas such as pant hems and cus.
Two-step presser foot lifter
The presser foot lifter is to raise or lower your presser
foot.
When sewing multi-layers or thick fabrics, the presser
foot can be further raised up manually to allow enough
space for your sewing work.
Note
The needle must always be at the highest position.
watch
tutorial
video
Bekijk gratis de handleiding van Veritas Power Stitch 21 DENIM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Veritas |
| Model | Power Stitch 21 DENIM |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 13180 MB |
