Handleiding
Je bekijkt pagina 30 van 76
29
EN
7. Mounting accessories: door compartments and shelves
To store food of different sizes, the door compartments can be set to different heights.
Proceed as follows: gradually pull the compartment in the direction of the arrows
until it comes loose and put it in the desired position.
The walls of the refrigerator are equipped with a series of guide proles so that the
shelves can be inserted if desired. To remove the shelf, lift it rst and then pull it out.
To put the shelf back in place, push it into place before lowering.
For the two-piece shelf, rst push back the rst part and then pull out the second part.
Raise the rear edge of the shelf to prevent food coming into contact with the wall
lining. Hold the shelf rmly when removing or replacing it and take care to avoid
damage.
8. Storing food
See Section 4 “Use”.
3.2 REMOVE DOORS
If the appliance is placed on its back or side for some time during this process, it must be made to stand upright for
six hours before connecting it to prevent damage to the internal components.
Tools required: crosshead screwdriver, at screwdriver.
Unplug and empty the appliance.
• Tilt the appliance backwards to remove the door. Rest the appliance on
a rm surface so that it does not slip away as you remove the door.
• Keep all removed parts to remount the door later.
• Do not lay the appliance down at; this may damage the cooling
system.
• We recommend doing this with two people.
1. Unscrew the hinge cover with a crosshead
screwdriver.
Bekijk gratis de handleiding van Veripart VPSBSND532EZ, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Veripart |
| Model | VPSBSND532EZ |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 6119 MB |
