Handleiding
Je bekijkt pagina 31 van 84
31
EN
1. Make sure the plug of the fridge-freezer combination is
removed from the socket.
2. Pry up the cover of the hinge until it releases. Disconnect
the cable. Unscrew the 4 screws holding the top hinge in
place and remove the hinge. Disconnect the loop of the
earth cable from the hinge. Insert the cable connector into
the opening at the top of the appliance. Remove the door
fastening and the cover from the small end caps.
7. Mounting accessories
- Adjustable shelves
The walls of the appliance are equipped with a series of guide proles so
that the shelves can be inserted if desired.
- Installing the door compartments
To store food of different sizes, the door compartments can be set to different
heights. Proceed as follows: gradually pull the compartment in the direction
of the arrows until it comes loose and put it in the desired position.
8. Storing food
See Section 4 “Use”.
3.2 REVERSING THE DIRECTION IN WHICH THE DOOR OPENS
Necessary tools:
• To remove the door, the appliance must be tilted backwards. We recommend doing this with two people. Rest
the appliance on a rm surface so that it does not slip away as you reverse the door.
• Keep all removed parts to reinstall the door later.
• During this process, the appliance must be placed on its back. After this, wait four hours before connecting the
appliance so that the oil can ow back to the compressor.
• Crosshead screwdriver
• Flat head screwdriver
• Spanner
3. Insert the door fastening and cable connection into the door
opening, then attach the small end cap.
Bekijk gratis de handleiding van Veripart VPKVC185CNFZ, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Veripart |
| Model | VPKVC185CNFZ |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 9063 MB |
