Handleiding
Je bekijkt pagina 19 van 28
In the PVR File System sub-menu you will be asked to format your USB 2.0 flash drive or
Hard Disc for PVR Operation. If you are not familiar with the various drive or partition options
for storage devices, start this process using a blank (ie. unused storage device), or one
which does not hold sensitive or required data.
PVR File System
Check PVR File System Start
USB Disk
Format
Time Shift Size
Speed
Free Record Limit 6 Hr.
Select Disk C:
Select Disc
To view and select the USB drive or Hard Disc that you would like to record to, press the
OK button to enter the Select Disk sub-menu and then press or buttons on your re m o t e
control to select the particular storage device type that is connected to the TV. Press the
OK button to return to the PVR File System sub-menu.
Note:
1) The OSD Language option allows you to select the language used in the various TV
menus from a wide selection.
At the initial setup stage of the TV, the default language is English, and it is recommended
that this setting is not changed unless you are fluent in an y new language chosen.
2) The Audio Languages and Subtitle Languages options relate to DTV reception only.
Some TV channels transmit their audio and subtitles in more than one language, and if this
is known in advance, you can select this alternative language. At the initial setup stage,
the default language is English, and it is recommended that this setting is not ch a n g e d
unless you are fluent in any new language chosen.
3) HDMI CEC (Consumer Electronics Control) allows your TV to share control of some
functions with various compatible equipment via an HDMI cable connection. The HDMI
cable connecting your
equipment to this TV must support both ARC and CEC functionality.
For example, with HDMI CEC set to "On" in the TV's menu and also on an HDMI connected
device that supports CEC (eg. a Blu-ray player), selecting the HDMI input on this TV sends
a signal to the Blu-ray player and may switch it On from its Standby state (depending on the
player's CEC capabilities). If the HDMI CEC and Auto Standby in the HDMI CEC menu are
both set to "On" in the TV's Option menu, and the connected equipment supports the
Standby function, then switching On the HDMI connected player may also switch On the TV
from its Standby state. This activity may even set the TV to the HDMI input that the external
device is connected to (again, these examples depend on the capabilities of your connected
equipment).The HDMI CEC system supports a wide variety of commands, many of which
may not be applicable to this TV or any connected HDMI equipment. Refer to the User
Manual of your other equipment to check what areas of the CEC commands they may be able
to work with.If after selecting CEC operation you find the TV or any connected equipment
performing unusually (eg. switching itself back on after you're switched it back to the
Standby mode), your connected equipment may not be compatible with this TV, and the
HDMI CEC sub-menu should be set to the off position.
18
Bekijk gratis de handleiding van Veon SRO242016, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Veon |
| Model | SRO242016 |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 2680 MB |
