Handleiding
Je bekijkt pagina 17 van 28
1. Picture mode:
Press OK Key enter Pcitrue mode Select Menu.Press adjust Picture mode.Under User
mode,press can adjust constrast,brightness,color,sharpness.etc.
The Tint option is available in NTSC system countries only.
2. Color temperature:
Press OK Key enter color temperature Select Menu. press
adjust olor temperature.
Under User mode press
can adjust Red ,Green,Blue.
3. Aspect ratio:
Press OK Key enter Aspect Ratio Select Menu. And press adjust Aspect Ratio.
The Aspect Ratio option allows you to select either Auto, or manually select 4:3, 16:9,
Zoom1, Zoom2 or Just Scan screen ratios. For general use leave this setting in the Auto
position.
4. Noise reduction:
Press OK Key enter Noise Reduction Select Menu. And press
adjust Noise Reduction.
The Noise Reduction option is for use in areas using ATV (analogue) transmissions.
5. Screen:
Press OK Key enter Screen Menu. And press
adjust H.POS,V.POS,etc. The Screen
option is only available once the Input Source is set to PC and a compatible signal is
present on the VGA input socket. Once selected, you can adjust the horizontal and vertical
screen position, size and phase or select an Auto Adjust mode.
< >
Balance
Auto Volume
Sound Mode Standard
SOUND
Surround Sound
SPDIF MODE
3.Sound menu
The third item of the menu is the Sound menu.
You can adjust sound effects here such as treble, bass, balance etc. Press to move,
press OK to adjust.
1.Sound mode:
Press OK Key enter Sound mode Select Menu.press adjust Sound mode. There are five
Sound modes that can be selected: Standard, Music, Movie, Sports, and User. The User
option allows you to adjust Bass and Treble sound effects from the TV speakers to suit your
listening preferences. NB. These sound modes are not active on the audio outputs.under
User mode press can adjust Treble,Bass.
2.Balance:
Press OK Key enter Balance adjust menu. press adjust Balance.adjust range is 0-100.
3.Auto volume:
Press OK key to switch on or off. The Auto Volume option helps reduce excessive input
signal variations that may lead to distorted sound. For most standard installations, this
sub-menu should be set to the Off position.
4.Surround sound:
Press OK key to switch On or Off. The Surround Sound option generates an artificial
widening of the sound stage from the TV. If this sound effect is not suitable in your
installation, leave this sub-menu in the Off position.
16
Bekijk gratis de handleiding van Veon SRO242016, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Veon |
| Model | SRO242016 |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 2680 MB |
