Venta AH902 Professional handleiding

350 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 24 van 350
24 EN
PUTTING INTO OPERATION
!
Attention! Make sure the device is switched off and the power plug is discon-
nected before you start!
1 Unpack the appliance, set it up and use the transport castors 14 to move it to
the place you want. To do this, lift slightly on the right-hand side. Remove battery
protection and protective foil from remote control 13.
2 Open filter compartment7 and remove coarse dust filter 9.
3 Remove and open HEPA filter10.
4 Re-insert opened HEPA filter 10 and coarse dust filter 9 and close filter compart-
ment 7.
5 Open evaporator compartment 3 and remove water tank 4.
6 Open water tank 4 and fill up to the MAX marker with cold water.
7 Close water tank4 securely and place into water tray 6, close evaporator com-
partment 3.
8 Adjust display 1 to the position you want (3 positions possible).
9 Adjust cable connector to the length you want by winding/unwinding in cable com-
partment 11. Connect power plug to mains and switch appliance on using on/off
switch 2 or remote control 13.
i
It can take approx. 60 seconds for the appliance to start up and the red light
on the display to go out. You will be able to hear a noise (gurgling), which is not a
quality defect.
1 Display
2 On/off switch
3 Evaporator compartment
4 Water tank
5 VentWave disk stack
6 Water tray
7 Filter compartment
8 UVC lamp (pre-installed)
9 Coarse dust filter
10 HEPA filter
11 Cable compartment
12 Hygiene disk (pre-installed)
13 Remote control
14 Transport castors
OVERVIEW
1
2
3
4
5
7
11
6
14 12
13
9
8
10
AH902

Bekijk gratis de handleiding van Venta AH902 Professional, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkVenta
ModelAH902 Professional
CategorieLuchtreiniger
TaalNederlands
Grootte51711 MB